1/14/2024 0 Comments Ps5 airflow requirements![]() ![]() ![]() Furthermore, these controllers are hundreds of dollars when compared to the DualSense controller that retails for $70. For instance, the Razer Wolverine V2 Pro and the Victrix Pro BFG may be officially licensed PS5 controllers, but they do not include haptic feedback or adaptive triggers. As gamers we are always trying to get a competitive edge and what better way than using self-proclaimed "Professional" controllers that feature additional buttons or tactile feedback? Well, the sacrifice is almost always the exclusive features found on the DualSense controller. In short, the cooling system that SONY has installed in the PS5 seems more than enough to keep the internal components of it at a good operating temperature, although everything indicates that this will be at the cost of not being able to maintain a low noise level.Perhaps the best example of this is third-party PS5 controllers. However, this heatsink does not have one or more fans attached to the aluminum foil blocks but rather they depend on a single blower fan pushing the air through all the areas, so there is a loss of efficiency when expelling outside the heat, which will force the blower fan to rotate fast enough to move a lot of air, and this almost necessarily means that the console will emit a lot of noise, both from the speed of the fan itself and from the moving air. The heatsink it incorporates is much larger and has much more heat dissipation surface than what PC over-air heatsinks usually have, although it is also true that not many processors really go beyond 125W of TDP. The SoC of the PS5 has a TDP of 150 watts, and we can only extrapolate it to a PC to be able to assess whether this cooling system of the PS5 will be enough to keep the internal hardware of the console at a good temperature. Does this heatsink have enough performance? both from the rear and along the rest of the perimeter, cooling the console very efficiently as long as it is not covered or covered in any part of these areas. It has a base made entirely of copper to promote more efficient heat transmission, and one of the most interesting features is that it has an integrated IHS that makes direct contact with the SoC.īy the external distribution of the grilles, as we have seen at the beginning, and by the location of the blower type fan in charge of moving the internal air circuit of the console, we can see that all the air will enter through the front grille of the PS5 but will come out. The heatsink that SONY has mounted on its PS5 has really very large dimensions, and it occupies around a third of the total volume of the console. ![]() made of copper and aluminum that it houses inside and that we will see in a moment. ![]() The one in charge of cooling all the internal components is a large blower type heatsink Although these are not exactly known, from the images we could say that it is probably between 100 and 120 mm in diameter and at least 80 mm thick, something that will give it an enormous capacity to move air, much needed due to the enormous size of the heatsink. Obviously these ventilation holes are arranged in key points, right at the outlet of the internal heatsink located on top of the components that generate the most heat, such as the SoC, the memory or the SSD. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |